1300W Hand Held Electric Power Concrete Vibrator Motor Remove Air Bubbles Tool

Description

Specifications Rated voltage: 110V Frequency: 60 Hz Needle diameter: 35 mm Shaft length: 150 cm Total weight: 6.8 kg Package Content 1 × 1300W Concrete Vibrator 1 × 1.5m Hose
Hand Held Concrete Vibrator, is a kind of professional construction tool machine, widely used in construction places. Easy to operate, the electric concrete vibrator is essential to construction use, ensuring the fastness of buildings. Vibrate pouring concrete to make it dense.
It suits for both construction sites and home.
NOTE
To assemble the hose to the unit: it is a reverse thread.
How to use
Maintenance and inspection
Before any work on the machine itself, pull the mains plug.
The brushes should be checked periodically and warm-out brushes should be replace in time,after replacing,inspect,whether the new brushes can move freely in the brush holder,keep running the motor for 15 minutes to match the contact of brushes and commentators.
Keep the ventilation slots clear from dirt , clean off the accumulated dust and oil dirt periodically.
During normal operation , if anything happens ,the power supply should be cut off at once and the tool should be checked and repaired
Regular inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosen,Tighten them immediately, failure to do so could result in personal injury
Do not expose the tool to rain , Do not use power tools in damp or wet location ,keep work area well lit do not use power tools where there is risk to cause fire or explosion.
Feature
Professional machine
Stable voltage 1300w, safe to operate
Hand held
Well constructed with quality materials
Powerful and safe concrete vibrator
Flexible shaft
Hard Nose with flexible shaft for hard to reach places
Shaft simply screws on to drive unit, no other tools required
Lift time to use
High quality and durable
Easy to maintenance and inspection
Widely used in construction
Electric control
Easy to use labour saving tool to help settle concrete and remove air bubbles from slabs & footings
Specifications
Rated voltage: 110V
Frequency: 60 Hz
Needle diameter: 35 mm
Shaft length: 150 cm
Total weight: 6.8 kg
Package Content
1 × 1300W Concrete Vibrator
1 × 1.5m Hose
On Mar-28-21 at 20:31:11 PDT, seller added the following information: