1ft TO 12ft Stainless Steel 7x7 Wire Cable Rope with Loop.Custom Cut to Size

Description

Custom Cut Cables 1-FT TO 12-FT
Stainless Steel 304 7x7 Wire Cable Rope
with a Single Loop and Double Loop
1.25mm   /  1.5mm   /   2.0mm
3.0mm cable is also available at additional cost
All Loops are ruffly 1 inch wide.
Length is from the end of each Loop or
from Single Loop to end of cable.
Double Loop
Both Ends of the Cable Wire are Looped and Crimped with Aluminum Sleeve
Single Loop
One End of the Cable Wire are Looped and Crimped with Aluminum Sleeve
Contact us for custom orders
Custom Cut to Order 1 FT - 25 FT or longer.
Wire rope, also called wire cable, is an assembly of wire strands formed hectically around a central core. The flexible construction includes 7 strands and 7 wires per strand in stainless steel, resulting in a small diameter stainless steel wire rope that is both flexible and offers superior resistance to corrosion. The cable breaking strength for wire rope is the strength at which new wire rope will fail under a stationary load. Cable breaking strength is not considered safe working load (SWL) limit.
Note: cable breaking strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should not exceed the recommended design factor of 20% of the products cable breaking strength
Not designed for overhead lifting or aircraft use; never exceed working load limit.
CABLE SPECIFICATIONS:
1.2mm / 1.5mm / 2.0mm
7 x 7 Stranded Construction
Stainless Steel 304
Loop breaking strength: n/a
FEATURES
Stainless Steel Sleeve Options:
Both Ends of the Cable Wire are Loop (Double Loop)
One End of the Cable Wire is Looped  (Single Loop)
Custom Cut to Order 1 foot - 12 feet
>>>>>DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED<<<<<
Do not use cable breaking strength for design or rating purposes. Use working load limit instead.
This Seller assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with
the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use.
IMPORTANT INFORMATION
Legal Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for wire rope are approximate only.  Information on wire rope should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product  usage or application.  Additional sizes of wire rope of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements.  Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements
.