FRZ-50 Pneumatic Concrete Vibrator Hand Held Bubble Remover with Vibrating Rod

Description

Product parameters: Vibrating rod diameter: 45mm Vibrator diameter: 50mm Total length of air vibrator: 6000mm Power: vane air motor Rated speed: 3000 rpm Air pressure for pneumatic vibrator: 4~5kg/㎡ Air consumption: 1.5 cubic meters / air intake per minute Inner diameter of air inlet pipe of air vibrator: 25mm Vibration frequency (in air): 3000 times/min Lower amplitude (in air): >10mm Total weight approximately: 27.5 kg Flexible shaft diameter: 13mm Hose diameter: 36mm Hose length: 3961mm
Store category
Sign Up Now !
You may also like
FRZ-50 Pneumatic Concrete Vibrator Hand Held Bubble Remover with Vibrating Rod
Product Description
Product parameters:
Vibrating rod diameter: 45mm
Vibrator diameter: 50mm
Total length of air vibrator: 6000mm
Power: vane air motor
Rated speed: 3000 rpm
Air pressure for pneumatic vibrator: 4~5kg/㎡
Air consumption: 1.5 cubic meters / air intake per minute
Inner diameter of air inlet pipe of air vibrator: 25mm
Vibration frequency (in air): 3000 times/min
Lower amplitude (in air): >10mm
Total weight approximately: 27.5 kg
Flexible shaft diameter: 13mm
Hose diameter: 36mm
Hose length: 3961mm
Features:
FRZ-50 pneumatic concrete vibrator is a special tool for mine construction. It has the characteristics of small size, high vibration frequency, easy to insert concrete for work, etc., especially the improved connection device, easier to operate. It is widely used in the construction of construction projects with compressed air source, and is used for vibrating and tamping various hard and plastic concrete.
packing list:
Vibrator
Vibrating rod
Use and maintenance
The vibrator air motor has compact structure and precise internal parts coordination, requiring careful maintenance by the operator.
Before use, the exhaust sleeve should be rotated 30 degrees to align the holes to allow smooth exhaust. During the trial operation for 3-5 minutes, check whether the operation is normal and whether the start is flexible. If there is no abnormality, it can be put into use (if the vibrating head does not move, you can straighten the vibrating head and the wind motor part and tap it on the ground lightly)
1. The inner diameter of the air inlet hose must not be less than 25 mm, and the wind pressure must not be less than 4-5 kg/cm².
2. When the air supply pipe is connected, the dirt in the pipe and the joint should be blown out to prevent the debris from entering the cylinder and causing the parts to wear or the rotor to jam.
3. When the vibrator is in use, the frequency can be adjusted by controlling the inlet air pressure according to the requirements of the site.
4. Stop using the air-driven vibrator. Rotate the exhaust air by 30 degrees to close the exhaust hole to prevent impurities from entering the cylinder from the exhaust port.
5. When repairing the wind motor, add enough grease (No. 2 calcium base grease SYB1401-62) to the upper and lower end cover bearing cavities to ensure the lubrication of the bearings. If it is stored for a long time, it should be disassembled and cleaned and sealed with oil to avoid corrosion.
6. If the blades of the wind motor are severely worn, the rotor will be stuck and cannot work. At this time, you can unscrew the handle and use the M10 screw to push out the end cap to remove the blade trimming burr or update the blade.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Apr-26-21 at 23:31:07 PDT, seller added the following information: